Okuma Makaira 20II SEa Supertuned
OKUMA Makaira Special Edition Conventional Reels
DFD incorporates both surfaces of the spool to maximize high-end drag pressure, efficiency, and overall smoothness. Mounted in the top of the spool and protected by the Hydro Block system is a multi-disc felt drag system that works in conjunction with a secondary drag system that is mounted under the spool. Even pressure is applied to both surfaces of the spool for maximum stability.
Features:
Open spool bearings with TSI-301 oil. Increases freespool 2-1/2 times
All non-spool bearings feature a full grease pack for maximum longevity
Features Special Edition Gun Smoke and Black anodizing
SE reels will feature a yellowfin tuna etched into the side plate
Frames have been machined out for increased clearance between spool and cross bars
MK-8/10/15 will feature MK-20 size handle knobs
MK-20/30 features the MK-50 handle arm and knobs
New lower speed 1.3:1 gear ratio featured in 20/30 sizes
6061-T6 Machined aluminum frame with forged side plates
17-4 stainless steel gearing
Helical cut gears for increased torque, smoothness, and improved gear meshing
Makaira reels all feature two-speed gearing systems
Cold forged, Type-II anodized, machined aluminum spool
CRC: Corrosion-Resistant Coating Process
Patented spool pin system for use with braided or mono lines
Carbonite Dual Force Drag system featuring Cal’s universal drag grease
Custom designed thrust bearing: Alleviates side load on heavy drag settings
4-pcs ABEC-5 precision Sapporo stainless steel ball bearings
Double dog, proprietary silent anti-reverse system
Ratcheting drag lever and drag cam for precise drag setting
Patented T-Bar handle with Easy Roll graphite insert on all models
Heavy duty stainless steel ratcheting clicker system
Heavy duty, 17-4 grade stainless steel drive and spool shafts
Type-II gunmetal anodized frame, side plates, spool, drag lever, and handle
Open top frame design on MK-5II, 10II, 15II, 20II, 30II
Lug and plug system on all open top reel models
Machined thumb rest on rear cross bar for improved ergonomics
Forged aluminum, full hard anodized reel foot, and reel clamp
Precision placement of drain holes maximizes water removal from reel
Special screw ports around side plate screws reduce water/corrosion buildup
Addition work done:
Machined Lever Drag Glide Plate for Smoother Function
Machined Drag Plates
Adjusted Drag System Via The Arrangement Of The Bellville Washers For Optimum Pressure Against The Drag Plates
Additional Specs:
4 Ball Bearings, 1TB
37lbs of Drag at Strike
55lbs of Drag at Full
3.8:1 Gear Ratio in High
1.7:1 Gear Ratio in Low
39" Per Crank in High
17" Per Crank in Low
Brand New Rod Clamp & Hardware
Brand New Extra Set Of Lugs
New Bottle Of Okuma Oil
There is very little boat rash on this reel. This reel was just serviced by the best Reel Service Tech in Orange County, California. He did a full Supertune and re-greased every moving part with the appropriate grease thickness required. It's full of Braid. It works awesome, and it's smooth and quiet. Here on the West Coast, turning the non-handle side lug nut upside-down is a popular practice, still giving you the handle side lug nut to clip in if you're getting spooled and have through it overboard. My starting price is just above the retail price, but the Machined Glide Plate is worth the extra cost by itself. The Supertune and the Braid make this a deal, as it will out fish a brand new reel.
Make Me An Offer